In the daily use of bicycles, the easiest and most tiring part is cleaning the bicycle. Of course, this item is essential for the maintenance of the bicycle, which not only makes the bicycle look shiny, but also prolongs the service life of related parts.
If you encounter rain or mud during the ride, the bicycle factory recommends that the relevant cleaning work be carried out immediately if possible after the end of the ride. Because dust, soil, etc. will become hard after a long time, and it will be difficult to clean the car when it adheres to it. First, before washing the bicycle, wet the whole bicycle with a water gun to completely soak the dirty Dingxi, and then prepare the cleaning tools: brush (it can be a toothbrush), sponge, and detergent (dishwasher is also acceptable). In the cleaning process, the main attention should be not to wipe the paint of the frame with those fine sands, and the Guangdong Bicycle Factory does not recommend using a high-pressure water gun to directly spray the hub and the bottom shaft to avoid water damage.
After cleaning the bicycle, use a rag to dry the excess water. For places such as the flywheel chain, it is recommended to dry it as soon as possible with a blower, and then after the moisture is completely dry, apply lubricating oil to the flywheel, chain, pressure plate, etc. , Remember not to add too much lubricating oil, so as not to be stained with mud and dust. In some places that are prone to rust, we can also dip some lubricating oil to avoid rust.
