In the previous article, the bicycle manufacturer mainly explained the problem of chainrings. In fact, not only the chainrings, but also the flywheel must be checked. Now I will introduce some inspection methods such as flywheels and front forks.
The inspection method of the flywheel is similar to that of the chainring. It is to check whether the teeth are severely worn. If it does, it must be replaced in time.
2. Rear derailleur
This wheel is responsible for shifting, and it has a serious impact on bicycles with transmissions. If wear occurs, it will affect the smoothness and accuracy of shifting at the slightest level, and the chain will wear out at the worst, causing high pressure on the transmission system and premature damage to the chain.
3. Check the fork
For the front fork with shock absorber, you need to check whether the front fork has oil leakage and wear. Generally speaking, repairing the bicycle fork is more professional. If there is oil leakage, it is recommended to go to a professional repair shop for repair.
4. For bicycles with full shock absorbers, check the wear condition of the turning points and remember to put on some lubricating oil.
The above is all the content of the quick check. The bicycle manufacturer hopes that everyone can develop the habit of checking the condition of the bicycle before riding. This is not only to better maintain our bicycles, but more importantly, to ensure our riding to the greatest extent. Safety.