We all know that bicycles are the most efficient means of transportation invented by mankind. However, a bicycle as a vehicle or fitness tool is of course composed of many mechanical mechanisms. Regarding machinery, this involves the problem of lubrication. Above, Guangdong Bicycle Factory emphasized the importance of lubrication of bicycle chains. Except for the chain, we need to lubricate all the rotating activities on the bicycle. Then, what are the places where the bicycle needs to be lubricated?
1. Transmission system
The transmission system is the most important part of the bicycle. Therefore, when we lubricate our bicycles, we should limit the lubrication of the chain, chainrings and chains. Of course, please remember not to lubricate a dirty transmission system. For details, please see “Guangdong Bicycle Factory: The Importance of Lubrication”.
2. Braking part
For bicycles with V-brakes, we need to lubricate the turning points, loosen the elbows, and the turning points of the brake handlebars need to be lubricated to maintain good braking performance. Remember, for disc brakes, don’t get oil on the disc and the film.
3. Transmission
The turning points of the rear derailleur also need to be lubricated, especially the guide wheels must be lubricated with chain oil, and the same is true for the front derailleur.
4. Line pipe
Regardless of whether it is a transmission cable or a brake cable, as long as the exposed steel wires need to be lubricated, they can be disassembled if conditions permit, and the entire line and pipe are lubricated once.
