|
Frame
|
Explorer
|
Paint
|
26 iron frame, head tube (60*50)*44*120 tapered head tube, middle tube ∮31.8, small bottom bracket, disc brake, OLD: 3/8*135, RC:
355 (specifically according to drawings) |
|
Front fork
|
26*195
|
Color
|
26*1.95 shock absorber front fork, 28.6*205 grainless riser, OLD: 3/8*100 bright fork shoulder, sleeve, ∮31.8 fork leg, with dust
cover, disc brake, labeling, with frame color |
|
Quick release
|
Color
|
31.8 aluminum alloy quick release with handle color matching
|
|
|
Bottom bracket
|
3T
|
black
|
3T black word
|
|
Eight pieces
|
Hide no pattern
|
Color
|
28.6*44*30, no pattern hidden headset, combination height: 12mm, with color water drop aluminum cover and waterproof plastic
cover, including sunflowers and ball holder, with color water drop cone cushion and cover |
|
Aluminum washer
|
Drawing circle
|
Color
|
28.6*30mm ·1pc
|
|
Roulette
|
Small three
|
black
|
170 black fish black small three-piece tea cover electric five claws
|
|
Front brake
|
BL-110
|
black
|
Mechanical disc brake, with disc: 160mm, suspension disc brake
|
|
Brake line
|
SP
|
black
|
F:730*900 R:(50+50)*1450mm black straight wire
|
|
Bicycle ladder
|
black
|
26″ double eye ladder, (the upper edge of the rivet to the outermost side of the foot post)
|
|
|
Chain
|
Brown
|
Positioning C50*110
|
|
|
Front dial
|
black
|
31.8 pull up
|
|
|
Back dial
|
black
|
After 40
|
|
|
Finger
|
24 speed
|
black
|
51-8*High imitation 1:1
|
|
Variable speed spool
|
SP
|
black
|
50+22+50+20+30 black straight wire
|
|
Bicycle handle
|
black
|
620 long black small swallow seal: VLRA mark
|
|
|
Bicycle handlebar
|
black
|
Hit the six-sided stem, hit the VLRA standard
|
|
|
Handle
|
Color
|
Water ripple color matching single pass
|
|
|
Rim
|
Small ladder knife
|
black
|
26*175 black car edge cutter ring*36 holes, one mark
|
|
Front axle skin
|
Front quick release
|
black
|
14G*36H*3/8*100*140mm suspension disc brake with safety hook, flange nut
|
|
Rear axle skin
|
black
|
14G*36H*3/8*135*180mm suspension disc brake, 7S, L=R, flange nut
|
|
|
Spokes
|
45#
|
black
|
No. 14 black striped mouthwash cap
|
|
tire
|
black
|
Black tire 26*2.125, Polyma standard
|
|
|
Inner tube
|
black
|
26*195 Ordinary US
|
|
|
Cushion
|
black
|
26*20mm thick butyl rubber
|
|
|
Round film
|
white
|
F/R white transparent oval
|
|
|
Rear brake
|
BL-110
|
Mechanical disc brake with disc: 160mm, suspension
|
|
|
Tower wheel
|
Positioning eight consecutive victories, blockbuster black
|
||
|
Tray
|
Black guard disc marking
|
||
|
Bicycle seat
|
Cai Pin
|
Hit *VLRA* mark 703 flame color matching
|
|
|
Bicycle seat tube
|
black
|
Iron black sand 28.6*300mm 1.2T necking without standard
|
|
|
Pedal
|
Black 59
|
ED
|
Type 63
|
|
Shaft plug
|
yellow
|
4 yellow shaft plugs
|
What is the difference between a mountain bike and a road bike?
- Applicable scenarios for mountain bikes and road bikes
It can also be seen from the names of the two models that mountain bikes are more suitable for complex road conditions, such as mountain roads, sand, steps, etc. The mountain bike feels more stable and comfortable, and its handling and braking are very good.
The road bike has certain requirements for road conditions, and all its designs emphasize speed. Therefore, his tires will be narrower than mountain bikes. If he encounters complex ground or slippery ground, he will have less flexibility and will cause more damage to the tires.
2.The difference in appearance between mountain bikes and road bikes
3.Tyres
The road bike track is flat enough and can provide enough adhesion, so the tires of road racing mainly consider the factor of reducing resistance, so the contact surface is very narrow and flat.
The mountain bike race has complex road conditions and various textures, so the tires mainly consider factors that increase friction and adhesion, so they are made into a wide, deep pattern, and irregularly convex appearance.
1.Handlebar controls
Mountain bikes usually have straight handles and wider handles, so that the handling of the bike will be better and mountain riding will be safer.
Road bikes generally demand speed the most, so the resistance must be reduced. The handlebars will be narrower.
2.Frame
Mountain bikes usually encounter various complicated road conditions, so stability and cushioning must have certain requirements, so the frame generally looks relatively strong.
The highway pursues speed, and light weight is the primary requirement.
The geometrical parameters of the frame are the biggest difference between the two. I will carefully sort out this follow-up opportunity. Riding culture has been developing for a long time, so the two frame technologies have also been refined in their respective directions in terms of material and design.
3.Fork
In order to adapt to complex terrain, the front fork of a mountain bike is an important component of a mountain bike. It has a high technological content and has high requirements for shock absorption and sensitivity.
